Skip to content

Property Requirements

A Practical Checklist for Your Next Warehouse Tour

Arrive with a plan for loading, layout, utilities, and approvals so every warehouse tour produces a useful comparison.

Industrial property in the Inland Empire
Industrial space in the Inland Empire · Editorial image

A productive warehouse tour should answer a few specific questions: can the building support your operation, what needs further verification, and what would it take to open? Use the same checklist at every Inland Empire property so the most attractive photograph does not outweigh a loading, layout, or timing problem.

Bring the operation with you

Before visiting, write a one-page requirement brief. Include your intended use, target area, inventory type, receiving and shipping patterns, equipment, staffing, office needs, and target opening date. Separate requirements that determine whether the site works from preferences that can be negotiated.

Take a layout sketch and invite the person who knows the operation's daily constraints. If a specific machine, rack design, or delivery vehicle determines the building choice, bring its specifications. The tour becomes more useful when the questions refer to real equipment and movements.

Walk the site in the order your goods move

Begin at the street and follow an inbound delivery through the gate, yard, loading position, staging area, and storage floor. Then trace an outbound order. Identify conflicts between trucks, employee parking, pedestrians, and neighboring occupants. Ask which areas and loading positions are included in the proposed lease.

Count loading doors, but also inspect their locations and the circulation around them. Note any visible damage or missing information for qualified follow-up. California's loading-dock rules address preventing vehicles from pulling away during loading; have the appropriate safety professionals evaluate how the proposed operation will handle dock safety.

  • Driveway access, gate arrangements, and room for the vehicles you use.
  • Dock and grade-level loading, staging space, and door equipment.
  • Column locations, aisle paths, floor condition, and storage layout.
  • Employee entries, restrooms, office functions, and parking arrangements.

Turn specifications into verification requests

Ask how clear height was measured and where any obstructions occur. Photograph relevant conditions with permission and have your rack or equipment designer verify the usable arrangement. A building's height does not establish that your storage plan has been approved.

Request electrical-service information and identify who can verify capacity for your equipment. For work in SCE territory, the utility's power-request process calls for project information such as load requirements. Confirm the actual utility serving the address rather than assuming every Inland Empire property uses the same provider.

Leave with a documented next step

Ask the applicable planning and fire authorities what they need to review your use and proposed storage. Describe the activities accurately, including outdoor storage, vehicle movements, equipment, and operating hours. Ontario's planning guidance specifically directs applicants to check the address and proposed use with planning staff.

After each visit, record three things: confirmed fit, open questions, and work required. Assign each question to an owner with a target response date. Your next shortlist meeting should compare written findings and the remaining verification work, with the broker coordinating information from the landlord and relevant specialists.

TAKE THIS INTO YOUR NEXT CONVERSATION

The takeaway.

Use every tour to build an evidence-based shortlist: what fits, what needs checking, and what must happen before occupancy.

Useful resources

PUT YOUR NEXT MOVE IN FOCUS

A better brief.
A better space.

Tell us where, how much space, and what your operation needs. We’ll help you take the next step.

Browse industrial space Steve Walbridge · 7am–7pm Pacific